REFILLING PROCEDURE: A color cartridge is a plastic shell with 3 chambers inside, having a piece of sponge in each chamber. There is a sticker on top of the cartridge. When you remove that sticker, you can see small holes and through those holes you can see three differently colored pieces of sponge. Note the color of the ink on the sponge in each cell. Take few ml ink in a syringe, insert the needle through a hole of the respective chamber and inject as much ink as the sponge can absorb. Repeat the same for other colors also. Use separate syringe for each color. After refilling, fix the sticker back. Do not touch the copper PCB & head/nozzle of the cartridge while refilling. Take special care for not to mix ink in one cell into another cell. The black cartridge filling procedure is also similar. After refilling, if ink leaks through the nozzle, keep the cartridge on a tissue paper paper, so that the nozzle of the cartridge touches the paper. The excess ink in the cartridge will be absorbed by the paper. Sometime ink may not come out properly through the cartridge head after the refilling. If so, insert the cartridge into the holder and suck 1 or 2 ml ink using the suction syringe through the bottom of the holder. Kindly watch instruction video of one of our product for color at: https://www.youtube.com/watch?v=FIGZnE-BE5Qr and for black at: https://www.youtube.com/watch?v=-eUoqeXM7DY&t=4s .Refilling a dried cartridge will not produce good results. It is better to refill a cartridge while some ink remains in it.
SHARP, CRYSTAL CLEAR & SMUDGE FREE PRINTS : Orchid ink is perfect for hassle-free refilling & offer sharp, clear, smudge free & long lasting prints. Specially formulated with high quality chemicals to offer an excellent colorful and photo quality printing performance. COMPATIBLE INK: Orchid is 100% compatible ink and the properties such as specific gravity, viscosity, surface tension, & color tone are same as original.
CONTENTS: Premium quality Fade Resistant Anti -clog color ink Cyan -60ml, Yellow-60ml, Magenta-60ml, Black ink-60ml, Color coded syringe with blunt tip needle – 4sets, ink suction prime holder – 2nos& suction syringe-1no. tissue paper-2nos,color identification sticks-3nos, USES: Ink cartridge refilling, Cleaning print head nozzle, Removing ink clogging, Removing old residual ink from the cartridge before refilling of the cartridges, Removing air from the cartridge after refilling of cartridges.
FAST AND EASY TO REFILL – It is very easy to refill the ink cartridge. Just remove/peel the sticker on top of the cartridge, take ink in the syringe, just fill it and paste the sticker back . Detailed instruction is given in the product description page and also included with the product.
CARTRIDGE NOZZLE HEAD CLEANING: In some situations ink may not come out properly through the nozzle/head of the cartridge after refilling, due to ink clogging or due to air bubbles in the cartridge. In such cases put the cartridge in the suction holder and suck one or two ml ink using the suction syringe. This is also useful for removing old residual ink from the cartridge before refilling.
IMPORTANT NOTE: Only cartridge in a good condition can give good prints after refilling. It is advised to refill the cartridge before it is fully empty and dry. Refill and reuse the used printer cartridge instead of throwing it to the garbage.